Place of Origin:Shandong, China | Metal Type:TINPLATE |
Use:Aerosol | Burst pressure:1.40Mpa |
Buckling pressure:1.20Mpa | Apperture diam.:25.40±0.10mm |
Over curl diam.:31.20±0.10mm | Contact height:4.00±0.15mm |
Height of the double seam:2.90±0.45mm | Crinkle height:65:6.40±0.50 |
Iron-printing machines: FUJI printing machine from Japan | Certificate:ISO9001:2008 & SGS checking |
Material:Metal |
Product Description
1.We have 10 Production Lines
2.Printing Color: According to customer
3.AvailableDiameter:45mm,52mm,65mm
4.Available Length: 58mm~240mm
5.Inner coating: Epoxy & Modfied Polyamidimides
6.Overprint varnish:glossy/matt
7.Pressure resistance: 12 bar for deforming pressure resistance
Smart Choice
1) Butane gas cartridges are filled with flammable liquefied gas. We attached a spring type safety valve to release the cartridge's vaporized gas, focusing on usersafety.
2) The safety valve helps users avoid damage from an accidental fire or explosion while using gas appliances with our company's butane gas cartridges.
3) The valve operates when the canister's pressure is increased by any external factor, such as fire. Through the safety hole, vaporized gas will be released to maintain the canister's normal pressure. By this process, the canister can be ready for reuse after the pressure is returned to normal.
4) Hwasan's safety valve product has been confirmed through "Research of butane gas cartridge with safety device" by the Institute of KGS R&D.
Use
1.Press tip vertically downward into center of refill valve
2.Apply firm pressure until lighters is full
3.Release tip and replace cap
Copyright © 2017 - 2022Shandong Zhicheng Daily Chemical Factory All Rights Reserved